The da Vinci Jr. has a robust build size of 5.9 x 5.9 x 5.9 inches and a resolution of 100 to 400 microns. Its design allows for the inclusion of an auto-feeding filament system, which takes the PLA filament to the extruder, and ensures that the filament is loaded properly and is ready to print.

The da Vinci Jr. 1.0, the print bed is already completely leveled and it only requires a Z Offset calibration. With the Z Offset calibration, you can adjust the distances between the extruder and the print bed, making sure that each print comes out perfectly.

The da Vinci Jr. features a fluid, press-and-release extruder which makes for an easy extruder replacement or cleaning experience. Simply open up your 3D printer, press the release button, and the replacement or cleaning process can be done within few seconds.

PLA filament spools are a non-toxic, biodegradable plastic that is recyclable and safe for the environment! With its compact design, the da Vinci Jr. only consumes 75 watts of power. This eco-friendly 3D printer makes sure that nothing goes to waste.


Product: 16.54 x 16.93 x 14.96 inch (42 x 43 x 38 cm )

Package Dimension: 21.53 x 22.87 x 18.7 inch (54.7 x 58.1 x 47.5 cm)

Maximum Build Volume (WxDxH): 5.9 x 5.9 x 5.9 inch (15x15x15cm)

Gross Weight: 33.07 lbs (15kg)

Technology: FFF (Fused Filament Fabrication)

Display: Panel Type – 2.6” FSTN LCM

Resolution: Fine 0.1 mm (100 microns)
                     Standard 0.2 mm (200 microns)
                     Speed 0.3 mm (300 microns)
                     Ultra Fast 0.4 mm (400 microns)

Language: Multi Language

Connectivity: USB 2.0, SD card*Systems are compatible with SDHC cards up to 32GB in size

Software: XYZware

Print Head: Single Nozzle

Nozzle Diameter: 0.4mm

Filament Diameter: 1.75mm

File Type: .stl , XYZ Format (.3w)

OS Support: Windows 7 above (for PC) Mac OSX 10.8 above 64-bit (for Mac)

Note: Stardard VGA driver on operating system, or a graphics card doesn’t support OpenGL 2.1, may cause unknown error in XYZware.

Filament Material: PLA

Hardware: Hardware Requirements (for PC/Mac)
X86 32/64-bit compatible PCs with 4GB+ DRAM (for PC)
X86 64-bit compatible Macs with 4GB+ DRAM (for Mac)

Setting up the Da Vinci Junior for the First Time